PDF资料描述
by the tolerance of the part selected, the RST signal isasserted On power-up, RST is kept active for approxi-mately 350 ms after the power supply has reached theselected toleranceThis allows the power supply and, AT24C164-SI27electrostatic discharge and transients in the circuits in which they are used Moreover, CMOS handling procedures should be employedCA32273Electrical Specifications T, AT24C164-SI27(lead-free/green/RoHS-compliant SOT-89 Pkg) AG503-89PCB 700 – 2400 MHz Fully Assembled Eval BoardSpecifications and information are subject to change without notice , AT24C164-SI27 CPUCS - AGP: <±250ps PCI - PCI: <500ps CPU - PCI: Min = 10ns, Typ = 20ns, Max = 40nsProgrammable Timing Control Hub for P4, AT24C164-SI27resin, oil or SF6 gasFig1Simplified outline (SOD61H2) and symbolThe cathode lead is marked with a black bandhandbook, halfpage, AT24C164-SI27*1 Measurements were made using a tungsten lamp (color temperature T = 2856K) as a light source*2 Switching time measurement circuit, AT24C164-SI27DescriptionU2789B is a low power twin PLL manufactured withTEMIC’s advanced UHF process The maximumoperating frequency is 2000 MHz and 200 MHz respec-, AT24C164-SI271 This selection provides compatibility with the standard 80C51 hardware which is multiplexing the address LSB and the data on Port 0Figure 6 Configuration Byte 0TSC87251G1A14 Rev A – September 21, 1998, AT24C164-SI27 15 Bit Programmable Divider Reference Divider: Programmable for Division Ratios 512 and 1024 3–State Phase/Frequency Comparator Operational Amplifier for Direct Tuning Voltage Output (30 V), AT24C164-SI27suited for CD radio cassette players2) Precise power supply (5V ± 01V) can be obtained byusing external reference voltage input (only AUDIOoutput has an internal reference voltage system), AT24C164-SI27
