PDF资料描述
221 Schematic Design with the MC9S12UF32 and a USB interfaceFigure 22-1 is a schematic of a MC9S12UF32 64-pin package minimum system implementationconfigured in single-chip mode and utilizing the internal voltage regulator Same connections can be usedwithMC9S12UF32 100-pin package The schematic provides a reference for the following, LIST/159M25P05-A14/34Figure 12 Read Data Bytes (READ) Instruction Sequence and Data-Out SequenceNote: 1 Address bits A23 to A16 must be set to 00h, LIST/159Note 1: The “Absolute Maximum Ratings” are those values beyond whichthe safety of the device cannot be guaranteed The device should not beoperated at these limits The parametric values defined in the “ElectricalCharacteristics” table are not guaranteed at the absolute maximum ratings, LIST/159DRAWING NUMBERP87C552SBAA 0 to +70, Plastic Leaded Chip Carrier 16 SOT188–3PART NUMBER DERIVATIONDEVICE NUMBER (P87C552) FREQUENCY MAX (S) TEMPERATURE RANGE (B) PACKAGE (AA), LIST/159A complete DAA is made with ST952 which inter-faces between capacitive isolation barrier and thetelephone lineIt integrates a high resolution A/D and D/A, LIST/159 (STANDARD PULSE) output utilizing Con-trol Register inputs T0, T1 and the ITRPT/STND (INTERRUPT/STANDARD)Mask-ing of the interrupt output (STDP) can be, LIST/159MC68HLC908QY1 in 16-pin packages Figure 1-2 shows the pin assignment for these packagesMC68HLC908QY/QT Family — Rev 2 Data SheetMOTOROLA General Description 17, LIST/159High-Current Switching Applications Package Options Include PlasticSmall-Outline (DW) Packages and StandardPlastic (N) 300-mil DIPs, LIST/159Test CircuitFigure 3 shows the test circuit for evaluation of the LM2480 Clamp Amplifier A high impedance VM (>100M) is used for DCmeasurements at the output20008303, LIST/159and a 26-bit accumulator are con-tained in each filter cellThe outputstage of the LF43881 contains a 26-bitaccumulator which can add the, LIST/159
