PDF资料描述
Hall biasLB1896No5225-7/8Noproductsdescribedorcontainedhereinareintendedforuseinsurgicalimplants,life-supportsystems,aerospaceequipment,, LIST/209XR-T6166IP 28 Lead 600 Mil PDIP –40°C to 85°CXR-T6166CD 28 Lead 300 Mil JEDEC SOIC 0°C to +70°CXR-T6166ID 28 Lead 300 Mil JEDEC SOIC –40°C to 85°CXR-T6166, LIST/209The output stages are similar to TTL totem-pole outputs, butwith the sink outputs, YS and ZS, and the correspondingactive pull-up terminals, YP and ZP, available on adjacentpackage pins, LIST/209Conventional Part No Global Part No Lighting ColorLN534RAMRLNM234AA01RedLN534RKMRLNM234KA01RedLN534GAMGLNM334AA01Green, LIST/209C0079C0082C0068C0069C0082C0073C0078C0071C0032C0073C0078C0070C0079C0082C0077C0065C0084C0073C0079C0078Temperature Range Package Part NumberC009528-Pin Plastic DIP DG535DJ, LIST/209mode (PDN= ”H”) If these clocks are not provided, the AK4383 may draw excess current because the device utilizesdynamic refreshed logic internally The AK4383 should be reset by PDN= ”L” after threse clocks are provided If theexternal clocks are not present, the AK4383 should be in the power-down mode (PDN= ”L”) After exiting reset atpower-up etc, the AK4383 is in the power-down mode until MCLK is input, LIST/209Maxim’s MAX8211 and MAX8212 are CMOS micropowervoltage detectors that warn microprocessors (μPs) ofpower failures Each contains a comparator, a 15Vbandgap reference, and an open-drain N-channel output, LIST/209Rise Characteristics(SI-3052V) Rise Characteristics(SI-3122V) Rise Characteristics(SI-3152V)Overcurrent Protection Characteristics(SI-3052V) Overcurrent Protection Characteristics(SI-3122V) Overcurrent Protection Characteristics(SI-3152V)–60 –40 –20 0 20 40 60 80 100 120 140506, LIST/209HL6312/13G104Polarization directionThe polarization direction is TM mode The polarization direction of 063 μm LD’s is different from, LIST/209the entire cycleThe data is latched into a cell on the trailing edge of W, BC1, BC2or CS, whichever occurs first, requiring the set-up and hold timerelative to these edge to be maintained The output enable input, LIST/209
