PDF资料描述
The MICRF104 is a low voltage Transmitter IC for remotewireless applicationsThe device employs Micrel’s latestQwikRadio technologyThis device is a true “data-in,antenna-out” deviceAll antenna tuning is accomplished, LIST/291Burst write operation can be interrupted by new write of any bankRandom column access is allowedWRITE to WRITE interval is minimum 1 CLK[ Write Interrupted by Read ]Burst write operation can be interrupted by read of the same or the other bank Random column access is, LIST/291been written for the 8051 are compatible with the DS5000FP A complete description of the instruction set and operation are provided in the Secure Microcontroller User’s GuideAlso note that the DS5000FP is embodied in the DS5000(T) and DS2250(T) modules The DS5000(T) , LIST/291Philips Semiconductors Product specification TrenchMOS transistor PHT6N03T Standard level FETFig7 Typical transfer characteristics, LIST/291prietary single polysilicon CMOS technology Thedevice offers fast access time with low power dis-sipation and requires a 5V power supplyThe M28C17 offers the same features than the, LIST/291TXHALT may be used to prevent a remote FIFO overflow,which would result in lost data This back-pressure mechanismcan significantly improve data integrity in systems that cannotguarantee the full bandwidth of the host system at all times, LIST/291ing losses and to produce a signal large enough todrive the output power transistor into saturation Thedriver stage is off during standby (MAX2232) and shut-down (MAX2232/MAX2233) modes, LIST/2911R/G/B VIDEO AMPLIFIERThe S1D2141X01 is a very high frequency Video amplifier system to be used in Monitor It contains 3 matched R/G/B video amplifiers with , LIST/291Schottky diodes offer the designeraninnovative boardspace saving solution for switching regulatorandpower management applicationsGeneration 5HEXFETs utilize advanced processing techniques to, LIST/291This 32-bit bus transceiver is built using advanced dual metal CMOStechnologyThis high-speed, low power transceiver is ideal for asynchro-nous communication between two busses (A and B)The Direction andOutput Enable controls are designed to operate the device as either four, LIST/291