PDF资料描述
switches in a three-phase inverter bridge This is usually via anexternal isolation and amplification stageThe SA828 is fabricated in CMOS for low powerconsumption, LIST/460IDSS Saturated Drain Current at VDS = 3 V, VGS = 0 V mA 15 30 50VP Pinch-off Voltage at VDS = 3 V, IDS = 01 mA V -30 -08 -05gm Transconductance at VDS = 3 V, IDS = 10 mA mS 30 40 70IGSO Gate to Source Leakage Current at VGS = -3 V μA1, LIST/460into AC (The reg is either HL ZF is set Load AC from M (reg) AC[M (reg)] or XY) Then increment the according to the LA reg, I, LIST/460In the TA31002 the initiation current consumption ( Isi ) can be changed by using the RSLterminalThe resistorRSL is connected to GND from PIN2 as shown in fig1Further, the initation current consumption( Isi) can bechanged by changing the value of RSLFig2 show the graph of Vs-Is characteristic at the time when RSL has been changed to three valuesThe Vs-Is, LIST/460MX26C512AMC-15 150 30 100 28 Pin SOPMX26C512AQC-15 150 30 100 32 Pin PLCCMX26C512AC-15 150 30 100 28 Pin TSOP(I)ORDERING INFORMATION, LIST/460 LP62S16128C-I Series PRELIMINARY (April, 2002, Version 00)4AMIC Technology, Inc, LIST/460INTRODUCTION The S6A2068 is a dot matrix LCD driver & controller LSl which is fabricated by low power CMOS technology FUNCTION — Character type dot matrix LCD driver & controller , LIST/460Flammability Classification 94V-0currency1 1500W peak pulse power surge capability with a10/1000m s waveform, repetition rate (duty cycle): 001%currency1 Exclusive patented PAR oxide passivated, LIST/460OP193/OP293/OP493Driving Capacitive LoadsOP193 family amplifiers are unconditionally stable with capaci-tive loads less than 200 pF However, the small signal, unity-, LIST/460An internal zener diode limits the gate-to-source voltage to asafe level for standard N-channel MOSFETsIn high-side configurations, the source voltage of the MOS-FET approaches the supply voltage when switched onTo, LIST/460
